Affordable Warm Isostatic laminators
- Up to 40 stacks/substrates can be laminated simultaneously
- Wide selection range, from 4 x 4 up to 12 x 12 inch bar size
- Easy to operate, quick product turn-around time
- Low maintenance
- Rigid, compact design takes little floor space
- Stores up to 99 pressure programs
- Maximum temperature 85 °C
- Pressure up to 70 MPa or 10,000 PSI
Isostatic lamination guarantees a completely uniform pressure all over the ceramic stack.
The ILS-series of isostatic laminators consist of a piston with cavity that’s submerged in a vessel filled
with (de-ionized/distilled) water, which is pressurized. Multiple heaters and a precise temperature regulator
accurately keep the piston and the water at the set temperature during the pressing cycle. Green
ceramic bars are vacuumsealed in plastic bags are placed in an easy to handle basket that’s used to
maximize the avaliable space in the pressing cavity and to pre-load the ceramic bars to increase the
productivity. The operator places the basket into the piston while standing in front of the machine. After
closing the door (safety interlock), the operator can start the pressure cycle. Motors smoothly lower the
piston containing the ceramic bars into the pressure vessel (water). The ceramic bars are pressurized
following the lamination profile previously programmed (or saved). Several lamination modes are avaliable
to either reach the final lamination pressure in one step or in several steps. The machine requires little
maintenance due to its sturdy, yet simple design. The long- term reliability of the pressure generator,
(sealing) o-rings and hydraulic components have been proven over years and years of daily use in the
field.
Technical Specification
Capacity: |
up to 40 stacks/substrates can be laminated simultaneously |
Maximum bar size: |
depends of machine model, max. 12 inch |
Cycle time: |
typically 12 cycles per hour |
Pressure range: |
5 - 70 MPa, 800 - 10 000 PSI (depends of machine model) |
Available options
- Vacuum bag sealing machine
Bar size (inch) |
Max. Pressure (MPa/PSI) |
Pressure vessel size (mm/inch) |
Length (mm/inch) |
Width (mm/inch) |
Height (mm/inch) |
Height max. (mm/inch) |
4 |
42/6000 or 70/10000 |
60 x 180 x 133/2.5 x 7 x 5 |
1230/48 |
880/35 |
1740/69 |
2390/94 |
6 |
42/6000 or 70/10000 |
100 x 250 x 224/4 x 10 x 9 |
1315/52 |
970/38 |
1855/73 |
2535/100 |
|
|
* 100 x 460 x 224/4 x 18 x 9 |
1315/52 |
1115/44 |
1980/78 |
2300/90 |
10 |
42/6000 or 70/10000 |
150 x 360 x 311/6 x 14 x 12 |
1500/59 |
1275/50 |
2000/79 |
2320/91 |
12 |
42/6000 |
200 x 450 x 398/8 x 18 x 16 |
2200/87 |
1150/45 |
2315/91 |
2600/102 |
* D double pressure vessel size |
How to order
ILS |
- |
X |
X |
X |
|
| |
|
| |
| |
| |
|
| |
|
| |
| |
D in case of double pressure vessel size |
| |
|
| |
Max. pressure 6 for 6000PSI, 10 for 10000PSI |
| |
|
Max. bar size in inch: 4 or 6 or 10 or 12 |
Isostatic Laminator |